To make EVA blocks into insoles, you will need the following materials and tools:
Materials:
– EVA foam block
– Marker or pen
– Scissors or utility knife
– Sandpaper (optional)
– Glue (if necessary)
Tools:
– Ruler or measuring tape
– Pencil
Here’s a step-by-step guide to making EVA blocks into insoles:
1. Measure your shoe size: Place your foot on a piece of paper and trace its outline with a marker or pen. Measure the length and width of your foot.
2. Transfer measurements to the EVA foam block: Use a ruler or measuring tape to transfer the measurements onto the surface of the EVA foam block. Make sure to leave some extra space around for trimming.
3. Draw an outline: Using a pencil, draw an outline based on your foot size and shape within the transferred measurements on the foam block.
4. Cut out the insole shape: Carefully cut along the drawn outline using scissors or a utility knife. Take your time while cutting to ensure accuracy.
5. Test fit and trim if needed: Insert the newly cut insole into your shoe and check for any areas that may require further trimming for proper fitment, comfort, and alignment with arches or pressure points.
6.Optional – Sand down rough edges: If desired, use sandpaper to smooth out any rough edges created during cutting for added comfort.
7.Optional – Attach additional layers if desired: Depending on personal preference, you can glue multiple layers of EVA foam together to achieve thicker cushioning if required.
8.Insert into shoes & adjust as necessary: Once satisfied with their fit, place each custom-made EVA insole inside each corresponding shoe carefully ensuring they are properly aligned underfoot for maximum support and comfort.
Remember that everyone’s feet have different needs; therefore, it might be beneficial to experiment with different thicknesses or shapes to find the perfect fit for your comfort and support requirements.
Details links of EVA block: https://www.eva-block.com/product/ideastep-dual-density-diecut-blocks/.